|
|
MISC
SPRAY TIP KIT - I5000 / DS5000 / SUPER5000all units
|
K NOZZLE ASSY LIME GRN-USES BAY7050
|
GANTRY DRIVE MOTOR BRACKET WELD
|
|
|
I5000 PUMP STAND CONTROL CABINET DISPLAY ADAPTER PLATE (GOT) FOR COM6121-P
|
I5000 UMBILICAL WALL MOUNT HOSE BRACKET
|
DECAL - I5000, TOUCH SCREEN TRIM (GT-21) USED WITH COM6121-P
|
SPRAY TIP, HIGH PRES, SS, 1/8", 00065
|
|
INSERT PB WHITE PLASTIC BEARING UHMWUSES FAS0011 GREASE ZERT
|
BUSHING, BRASS, 1/4" NPTM X 1/8", NPTF
|
FITTING, STREET ELBOW, BRASS, 3/8"NPT
|
FITTING, CROSS, CAST BRASS, 3/4"NPTF
|
FITTING 1/4 (Y) CONN. 20-553CPUSH LOCK
|
5/8" CLAMP, PIPE, CUSHIONED, ZINC PLATED
|
3/4",CLAMP, PIPE, CUSHIONED, ZINC PLATED
|
7/8",CLAMP, PIPE, CUSHIONED, ZINC PLATED
|
1-1/8",CLAMP, PIPE, CUSHIONED, ZINC PLATED
|
CABLE, RS422 COMMUNICATIONS FOR COM6121-P
|
HMI TERMINAL, 4.3", 24VDC -PROGRAMMED GOT 2000 - IF USED FOR A REPLACEMENT ON A I5000 MADE BEFORE 12-1-17 A 5PLT1101 BEZEL & 9DEC2465-B DECAL WILL BE NEEDED SEND 5DOC0002 WITH SCREENIF THEY ARE NOT REPLACING A GOT 1000 OR 2000 THEY WILL NEED A COM6102
|
ELEPHANT TRUNK REPLACEMENT RUBBER NOZZLE
|
GREASE ZERK, 1/4"- 28, LONG, STRAIGHT THREAD
|
5/16-18 X 1" HEX HD CAP SC GR8 W/VIBRA TITE
|
BOLT, SS, 5/16 - 18 X 5/8", HH
|
BOLT, SS, M8 X 16 MM, HHCS
|
M6-1.0X16MM SOC HD CAP SC 18-8S.S.
|
T-NUT, ROLL-IN, W/ FLEX HANDLE, 5/16 - 18, SS PLATED
|
WASHER, SPLIT, LOCK, SS, 5/16
|
8 HOLE INSIDE GUSSET CORNER BRACKET
|
SUCTION STRAINER, 1-1/2"NPTF, 40 MESH
|
|
|
|